Much More Racing - The LBMCC 2008 Mini Grand Prix

Class 1. Mini Se7en. LBMCC Race Series Cars

Tamiya M03 FWD Chassis, all variants (M03, M03M, M03L and M03R)

Any Commercially available, M Chassis specific, Lexan Body Shell

Any Tamiya D60 Radial (treaded) tyre with any insert. No additive permitted.

1700mah “Stick Pack” type, commercially manufactured cell.

20t Pinion with kit provided internal diff and gearing (no ball diffs)

Kit supplied Mabuchi or Johnson 540 “Silver Can” motors

Class 2. Mini Miglia. Tamiya Eurocup Series Cars

All cars must be built to the standard specifications and without modifications, other than hop up parts listed below. No other standard parts other than these may be used, Non Tamiya pinions of the same pitch, sizes 16t to 20t can be used. Any Tamiya shims, spacers and O rings can be used. This is mainly for the removal of play in moving parts. Parts that vary only by colour are also permitted. The use of solid differentials is not permitted. These must be built as per kit instructions. However any grease or oil maybe used. Blue-tac or other similar substances are also not permitted.

Tamiya M03 FWD Chassis, all variants (M03, M03M, M03L and M03R)

Any Commercially available, M Chassis specific, Lexan Body Shell

5.0mm Minimum Ride Height inc Shell

50746 – CVA Super Mini Dampers

53619 – CVA Mini Dampers

53569 – Clamp Type Aluminium Wheel Hub (6mm Thick)

53056 – Pin Type Wheel Adaptor

53344 – M03 Aluminium Heatsink

53345 – M03 Toe-in Uprights

53523 – M03/04 Aluminium Front Uprights

53597 – M03 Assembly Universal Shaft Set

Aluminium hardware parts including screws, ball joints and turnbuckles maybe used. No other Hop up parts may be used, unless notification of change is made during the season. Non Tamiya or other Tamiya hop-up bearings of the same size (e.g. 53008, 53029 & 53066) can be used in place of metal or plastic bushes. Bearing shields may not be removed. Any Tamiya Spring may be used as long as it is without modification. 5.0mm Ride Height rule will be enforced.

Limited Edition parts (49xxx)

49417 M-03R Chassis Kit

49421 M-03R Aluminium Front Uprights

49422 M-03R Aluminium Rear Uprights (Toe-in)

49423 M-03R Aluminium Servo Mount

49424 M-03R Aluminium Motor Heatsink

Speed Controllers

45029 ESC TEU-101BK

CPR UNIT (FROM OLDER XB PRO KITS)

Bodyshells

As listed in General Rules above.

Wheels

Any Tamiya 60D wheel can be used. This included hop up (53xxx,54xxx) and carbon reinforced wheels

Tyres

50683 - M-Chassis 60D radial tyre

50684 - M Chassis M Grip Radial Tyre

53254 - M Chassis S Grip Radial Tyre

Tyres must not be modified in anyway. This includes belting and rounding of the edges of the tread. Additive may be used. Maximum tyre diameter is 62mm.

Inserts

Only 1 insert per tyre. Inserts cannot be modified in anyway. Only 60D inserts are permitted.

50686 – 60D Inner Sponge Set

53204 – M-Chassis Inner Sponge

53255 – 60Dinner Sponge (Hard) Set

Motors

Motors are Tamiya RS540 Sport Tuned (53086) Not handed out!

Class 3. Mini Silhouette. Modified Class

Any 2WD or 4WD Chassis max wheelbase 225mm:

Any slick or treaded rubber tyre/insert/Wheel (excluding Mini pin and Rally block type tread patterns) Additive permitted. (must be via a safe applicator)

Any NiCad, NiMh or LiPo Cell.

Any Motor Up to 19tbrushed/10.5 Brushless.

Any Commercially available bodyshell

All other specs are open.